STEELFABS Model S-100 Bridge Plugs are cast iron and designed for fast run-in and quick drill-out. These bridge plugs provide a solid pressure tight seal and are ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. Steelfabs S-100 bridge plug has an element backup system, which allows the plug to be used for any pressure range not exceeding 10,000 psi. The standard temperature rating is of 350°F but with special packing elements the temperature range is rated to 450°. Steelfabs S-100l bridge plug can be mechanically or wire line set using our suitable Mechanical Setting Tool or Wireline Adapter Kit.
PRODUCT FEATURES
- Available in wireline, hydraulic or mechanical set.
- 10,000 psi rating.
Small OD for fast run-in.
- Pinned cones to prevent preset.
- Setting force locked in with ratchet lock for dependable sealing.
- Cast iron construction for quick drill-out.
- Short design for quick drill out.
- Keyed lower cone to prevent spinning during drill out.
- Pressure equalized before upper slips drilled out.
CASING DATA |
CASING ID RANGE |
MAX OD OF TOOL |
PRODUCT
NUMBER |
OD |
WEIGHT |
MIN. |
MAX. |
|
in. |
PPF |
in. |
in. |
in. |
|
5 |
11.5-20.8 |
4.156 |
4.560 |
3.937 |
S-100-0500 |
5 ½ |
13.0-26.0 |
4.548 |
5.044 |
4.312 |
S-100-0512 |
6 ⅝ |
17.0-35.0 |
5.575 |
6.135 |
5.375 |
S-100-0658 |
7 |
17.0-38.0 |
6.004 |
6.450 |
5.678 |
S-100-0700 |
9 ⅝ |
40.0-61.0 |
8.375 |
8.835 |
8.125 |
S-100-0958 |
| *ADDITIONAL SIZES AVAILABLE UPON REQUEST |
|
|
|
|
